Product Reviews

SMALLRIG Universal Phone Holder Mount 4382 Review

A flexible phone clamp for creators who want to mount a smartphone on a camera or tripod and add a microphone or light.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review centers on a compact clamp designed to put a smartphone on a camera or tripod for filming, streaming, or interviews.

Its rotating joints and accessory mounts make it adaptable, provided your phone fits its width range and your setup stays within the stated load limit.

SMALLRIG 4382 Mount Review Summary

The quick verdict

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want to mount a smartphone on a camera or tripod and add a microphone or light.

  • Fits smartphones measuring 57–88 mm wide.
  • Attaches through a 1/4-20 threaded hole or a cold shoe at the base.
  • Has a cold shoe on top for compatible microphones or lights.
  • Supports portrait and landscape positioning, with a locking position at 90 degrees.

Pros

  • Supports two common mounting interfaces at the base: 1/4-20 threading and cold shoe.
  • Makes portrait-to-landscape switching part of the mount rather than requiring a different holder.

Consider before buying

  • The 57–88 mm phone-width range means buyers should measure their handset with its case if they plan to keep the case on.
  • The 500 g maximum load requires accounting for the phone and any accessories supported by the mount.
Read the full review summary

The 4382 combines a phone clamp with a 1/4-20 threaded hole and a cold shoe on the base, so it can attach to compatible camera or tripod setups.

A second cold shoe sits on top for a microphone or light, while spaced threaded holes support compatible power bank holders. The phone can switch between portrait and landscape orientation and lock at 90 degrees.

Its appeal is flexibility in a small, 73-gram mount: one clamp can serve different framing needs without requiring a dedicated phone rig for each orientation.

It suits mobile creators, interviewers, and livestreamers who want to build around camera or tripod mounting points. Check your phone's width, the complete mounted load, and the accessory interfaces before choosing it.

The buying factors

SMALLRIG 4382 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Mounting flexibility

The base combines a 1/4-20 threaded hole and cold shoe for compatible camera or tripod setups.

8/10

Orientation adjustment

Portrait and landscape modes, a 90-degree lock, and two 180-degree adjustment joints offer useful framing options.

8/10

Accessory expansion

A top cold shoe and spaced threaded holes provide options for compatible accessories.

8/10

Phone fit range

The clamp supports phone widths from 57 to 88 mm, covering a broad range of handset sizes.

6/10

Load headroom

The stated maximum capacity is 500 g, so the phone and attached setup need to remain within that limit.

8/10

Portability

At 73 g and roughly 4.06 × 1.63 × 1.23 inches, it is a compact mount for a camera bag.

Key Features and Specifications of SMALLRIG 4382 Mount

  • Fits smartphones measuring 57–88 mm wide.
  • Attaches through a 1/4-20 threaded hole or a cold shoe at the base.
  • Has a cold shoe on top for compatible microphones or lights.
  • Supports portrait and landscape positioning, with a locking position at 90 degrees.
  • Two rotary joints each support 180-degree adjustment.
  • Spaced threaded holes support installation of compatible power bank holders.
  • Weighs 73 g and has a stated maximum load capacity of 500 g.

Pros and Cons of SMALLRIG 4382 Mount

Pros

  • Supports two common mounting interfaces at the base: 1/4-20 threading and cold shoe.
  • Makes portrait-to-landscape switching part of the mount rather than requiring a different holder.
  • Provides a top cold shoe and additional threaded holes for building out a filming setup.
  • Its light weight and compact dimensions suit portable camera and tripod kits.

Consider before buying

  • The 57–88 mm phone-width range means buyers should measure their handset with its case if they plan to keep the case on.
  • The 500 g maximum load requires accounting for the phone and any accessories supported by the mount.
  • The package includes the phone holder only, so a camera, tripod, microphone, light, and other accessories must be sourced separately.

Who Should Buy SMALLRIG 4382 Mount?

Good fit

Consider the SMALLRIG Universal Phone Holder Mount 4382 if you want one phone clamp that can move between compatible camera and tripod setups.

Its base mounting choices and two adjustment joints are useful when the same phone needs to serve for a landscape recording, a portrait livestream, or an interview angle.

It is also a practical choice for a modular mobile rig. The top cold shoe gives you a place to attach a compatible microphone or light, and the threaded holes can accommodate compatible power bank holders.

Before buying, verify phone width with the case you intend to use and make sure the total supported load stays below 500 g.

Who should skip it

Look elsewhere if your phone is narrower than 57 mm or wider than 88 mm in the configuration you plan to mount, or if your combined supported load would exceed 500 g.

This is a poor fit if you need a complete filming kit in one package: the included item is the holder, while camera or tripod support and other accessories are separate.

How the SMALLRIG 4382 Mount fits a mobile filming setup

A mount that works across camera and tripod rigs

The base can connect by 1/4-20 thread or cold shoe, which gives the holder two ways to join compatible equipment.

That can simplify moving a phone between a camera rig and a tripod, as long as the receiving equipment offers one of those interfaces. The holder itself does not replace the support equipment.

Orientation and angle control

Portrait and landscape support addresses a common practical need for creators publishing in different formats. The 90-degree locking position helps define the orientation change, while two 180-degree joints give additional positioning freedom.

Consider the space around your rig and the intended phone angle when deciding whether this arrangement suits your framing.

Accessory options and the load limit

The top cold shoe is intended for a microphone or light, and the spaced threaded holes are designed for compatible power bank holders.

These interfaces add useful options, but the stated 500 g maximum calls for checking the combined load before assembling a rig. Keep any attached equipment within that capacity.

Phone fit and portability

The 57–88 mm width range gives buyers a straightforward compatibility check: measure the phone as it will be used, including its case if applicable.

At 73 g and about four inches long, the holder is small enough to keep with a portable camera setup. The listed dimensions can also help you check clearance around other gear.

Alternatives to SMALLRIG 4382 Mount

Cell Phone Camera Mounts alternative

SMALLRIG Magnetic Metal Phone Mount 5156
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG Magnetic Metal Phone Mount 5156

Choose the 4382 if you prefer a clamp specified by phone width and want its top cold shoe for a microphone or light.

The 5156 is a closer fit for a MagSafe-compatible iPhone user who values magnetic mounting and a detachable accessory plate; its magnetic attachment makes secure handling especially important.

  • The 5156 is designed for iPhone models with MagSafe functionality and supports portrait and landscape switching.
  • It has two rotating shafts, a 1/4-20 thread or cold shoe at the base, multiple threaded holes, and a detachable top plate for compatible accessories.
  • Its stated load capacity is 500 g.
  • The 4382 uses a width-adjustable clamp for phones from 57 to 88 mm, with two 180-degree adjustment joints and a stated 500 g maximum load.

Is SMALLRIG 4382 Mount Worth It?

The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for mobile creators who want orientation changes, multiple camera or tripod mounting options, and room for compatible accessories in a compact holder.

Its practical value depends on matching the clamp width and keeping the mounted setup within the 500 g limit.

Check those fit details against your phone and rig before buying. If they align, the 4382 offers a flexible foundation for phone-based filming, streaming, and interviews; plan to supply the camera or tripod and any additional accessories separately.

Your review at a glance

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want to mount a smartphone on a camera or tripod and add a microphone or light.

  • Fits smartphones measuring 57–88 mm wide.
  • Attaches through a 1/4-20 threaded hole or a cold shoe at the base.
  • Has a cold shoe on top for compatible microphones or lights.
  • Supports portrait and landscape positioning, with a locking position at 90 degrees.

Written by

typband.com Editorial Team

Editorial team

Independent editorial coverage of electronic music.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG Universal Phone Holder Mount 4382

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want to mount a smartphone on a camera or tripod and add a microphone or light.

  • Fits smartphones measuring 57–88 mm wide.
  • Attaches through a 1/4-20 threaded hole or a cold shoe at the base.
Check Video Reviews on Amazon