Product Reviews

Silkland DP80 DisplayPort Cable Review: A Short, High-Bandwidth Link

A short DisplayPort cable for gamers building a compact setup around compatible high-refresh monitors and graphics cards.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This Silkland DP80 DisplayPort Cable review looks at a 1.6-foot VESA-certified cable built for short connections between a gaming PC and monitor.

Its headline appeal is 80Gbps bandwidth and support for demanding display modes, provided both connected devices can use them.

Silkland DP80 Cable Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers building a compact setup around compatible high-refresh monitors and graphics cards.

  • VESA-certified DisplayPort 2.1 cable rated for 80Gbps and UHBR20.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, supports up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz, 480Hz or 360Hz.
  • Lists VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D and HDCP 2.3 support.
  • Male-to-male DisplayPort connectors, with backward compatibility for DP 2.0 and DP 1.4.

Pros

  • High bandwidth and ambitious refresh-rate support for compatible systems.
  • Compact length is suited to a close PC-to-monitor connection.

Consider before buying

  • The 1.6-foot reach limits placement and cable-routing options.
  • The top resolution and refresh-rate modes depend on compatible graphics hardware, monitor capability and settings.
Read the full review summary

The DP80 is designed for a direct DisplayPort-to-DisplayPort connection where the computer and monitor sit close together.

Its listed capabilities include uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz, with higher modes available up to the stated limits when DSC is enabled.

That range makes it a specialized option for high-end gaming displays rather than a general-purpose long cable.

The short length can help keep a desk connection tidy, while the latch-free plugs, braided exterior and shielding address everyday handling and signal integrity considerations.

The key buying check is compatibility: the cable cannot give a system a higher refresh rate or resolution than its graphics card, monitor and settings support.

The buying factors

Silkland DP80 Cable Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth ceiling

The stated 80Gbps rate and UHBR20 compatibility make it suitable for high-bandwidth display connections when the rest of the system supports them.

9/10

High-refresh support

The listed uncompressed modes include 4K at 240Hz and 2K at 540Hz, with higher resolutions and refresh rates up to the described limits using DSC.

5/10

Connection flexibility

At 1.6 feet, it suits nearby devices but leaves little room for routing between separated components.

8/10

Build details

Tinned copper conductors, triple shielding, gold-plated connectors and a nylon exterior provide a thoughtful set of construction details.

8/10

Setup convenience

The latch-free design is intended to make plugging in and removing the cable straightforward, especially where access is tight.

7/10

Compatibility range

It is backward compatible with DP 2.0 and DP 1.4, but realizing the top modes depends on the connected equipment.

Key Features and Specifications of Silkland DP80 Cable

  • VESA-certified DisplayPort 2.1 cable rated for 80Gbps and UHBR20.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, supports up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz, 480Hz or 360Hz.
  • Lists VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D and HDCP 2.3 support.
  • Male-to-male DisplayPort connectors, with backward compatibility for DP 2.0 and DP 1.4.
  • Uses 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors and a nylon exterior.
  • Measures 1.6 feet and has a latch-free connector design.

Pros and Cons of Silkland DP80 Cable

Pros

  • High bandwidth and ambitious refresh-rate support for compatible systems.
  • Compact length is suited to a close PC-to-monitor connection.
  • Latch-free connectors are designed for easier removal.
  • Multiple shielding and cable construction details are specified.

Consider before buying

  • The 1.6-foot reach limits placement and cable-routing options.
  • The top resolution and refresh-rate modes depend on compatible graphics hardware, monitor capability and settings.
  • Its DisplayPort-to-DisplayPort connectors do not suit a setup that needs a different connector type.

Who Should Buy Silkland DP80 Cable?

Good fit

Consider the DP80 if your gaming PC and monitor are close together and both have DisplayPort connections. Its 80Gbps rating and stated high-refresh modes make it a candidate for systems designed around demanding resolutions and frame rates.

It is also a practical fit if you value a short run and a connector that can be removed without a latch.

Before choosing, confirm your monitor and graphics card support the particular DisplayPort mode you plan to use, and that 1.6 feet is enough for your route.

Who should skip it

Choose a longer cable if the PC and monitor are separated or you need extra slack for a moving desk or careful cable routing. The short length is the central constraint of this model.

Look elsewhere if your devices do not have matching DisplayPort ports, or if you are buying a cable to unlock a display mode your computer or monitor does not support.

How the Silkland DP80 Cable Fits a Gaming Setup

A high ceiling that depends on the whole system

The DP80's 80Gbps rating is its defining specification. It lists uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz, plus higher modes up to 16K at 60Hz with DSC.

These are connection capabilities, not a guarantee that every computer and display combination will offer each mode; check the specifications and settings for both ends before buying.

The short reach suits a focused layout

A 1.6-foot cable works best when the PC and monitor are close, such as on the same desk with ports facing one another.

That compact reach can reduce excess cable in a simple setup, but measure the path from port to port rather than the straight-line gap. Leave enough slack for the cable's route and any movement of the equipment.

Connector handling and construction

Silkland specifies a latch-free plug, 28AWG tinned copper conductors, triple shielding, gold-plated connectors and a nylon outer covering. Together, these details describe a cable intended for convenient handling and a protected signal path.

The no-latch design may be useful if ports are difficult to reach; make sure the cable can be routed without placing strain on the connection.

Display and audio features

VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+ and HDCP 2.3 appear among its supported features, alongside uncompressed multichannel audio pass-through.

These can matter in a gaming or multi-display setup, but their usefulness depends on support throughout the connected devices and software.

For multiple screens, the product guidance calls for using the same cable type rather than mixing DisplayPort and HDMI.

Alternatives to Silkland DP80 Cable

One supplied option offers a useful length and bandwidth tradeoff; compare the cable reach and display modes your setup requires before choosing.

Computer DisplayPort Cables alternative

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft

Choose the DP80 for a nearby connection where its higher bandwidth ceiling is relevant. The 10-foot cable is a better fit when reach matters more and its stated 54Gbps capability covers the display modes you need.

  • This Silkland cable is 10 feet long and rated at 54Gbps. Its listed support includes 4K at 240Hz and 8K at 120Hz, with 16K at 60Hz using DSC.
  • The DP80 is rated for 80Gbps and is only 1.6 feet long, making it most suitable for close connections and systems seeking its higher listed bandwidth.

Is Silkland DP80 Cable Worth It?

The Silkland DP80 DisplayPort Cable is worth considering for a compact gaming setup that needs a short, high-bandwidth DisplayPort connection. Its VESA certification, 80Gbps rating and detailed construction make it a strong match on paper for compatible hardware.

Measure the cable route and verify support for your target display mode at both the graphics card and monitor.

If you need more than 1.6 feet, the longer 54Gbps Silkland option may be a more practical fit; if your setup is close and compatible, the DP80's greater stated bandwidth is its main reason to choose it.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers building a compact setup around compatible high-refresh monitors and graphics cards.

  • VESA-certified DisplayPort 2.1 cable rated for 80Gbps and UHBR20.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, supports up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz, 480Hz or 360Hz.
  • Lists VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D and HDCP 2.3 support.
  • Male-to-male DisplayPort connectors, with backward compatibility for DP 2.0 and DP 1.4.

Written by

typband.com Editorial Team

Editorial team

Independent editorial coverage of electronic music.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers building a compact setup around compatible high-refresh monitors and graphics cards.

  • VESA-certified DisplayPort 2.1 cable rated for 80Gbps and UHBR20.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, supports up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz, 480Hz or 360Hz.
Check Video Reviews on Amazon