Product Reviews

Donner DP-1 Guitar Power Supply Review: A Compact Option for Multi-Pedal Boards

A practical choice for guitarists powering several 9V pedals plus select 12V or 18V effects from one compact supply.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Donner DP-1 Guitar Power Supply review centers on a compact unit designed to power a multi-pedal board from one AC input.

Its mix of ten outputs, several voltage options, and independent short-circuit protection may suit players with varied effects, provided their pedals’ current requirements fit the available outputs.

Donner DP-1 Review Summary

The quick verdict

Donner DP-1 Guitar Power Supply
4.5/5

7,000+ ratings

Read Amazon Reviews

Donner DP-1 Guitar Power Supply

A practical choice for guitarists powering several 9V pedals plus select 12V or 18V effects from one compact supply.

  • Ten DC outputs: seven 9V/100mA, one 9V/500mA, one 12V/100mA, and one 18V/100mA.
  • AC input range of 100V–240V, with an 18V DC supply input specified.
  • Independent short-circuit protection; the other outputs can continue working if one output is shorted.
  • Noise-reduction circuit design and direct-current output, described as supporting lower-noise operation and supply stability.

Pros

  • Ten outputs allow several compatible pedals to share one supply.
  • The output mix includes 9V, 12V, and 18V connections.

Consider before buying

  • Most outputs are rated at 100mA, so the available current may constrain boards with several higher-draw pedals.
  • The isolation effect is not described as absolute circuit isolation, a relevant distinction for players choosing a supply around strict isolation requirements.
Read the full review summary

The DP-1 provides seven 9V outputs rated at 100mA, one 9V output at 500mA, one 12V output at 100mA, and one 18V output at 100mA.

That range gives a board builder a useful starting point for powering multiple pedals, including a higher-current 9V effect and select pedals designed for 12V or 18V. Ten included power cables help connect the outputs to pedals.

The aluminum-alloy enclosure is described as light and portable, with a compact rectangular form suited to pedalboard use.

Donner also specifies a noise-reduction circuit design and independent short-circuit protection: if one output is shorted, the others can continue working.

Before buying, match every pedal’s required voltage and current to the output plan, and account for the manufacturer’s qualification that its simulated isolation is not absolute circuit isolation.

The buying factors

Donner DP-1 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Output count and variety

Ten outputs cover three voltage levels, including a dedicated 500mA 9V connection.

8/10

Voltage flexibility

9V, 12V, and 18V outputs accommodate a mix of compatible effects.

6/10

Current allocation

Only one 9V output is rated at 500mA; the remaining outputs are rated at 100mA.

8/10

Board-friendly portability

The compact rectangular aluminum-alloy enclosure is described as light and portable.

7/10

Fault containment

Independent short-circuit protection is intended to let other outputs continue operating if one shorts.

5/10

Isolation clarity

The design aims for an isolation effect, while Donner clarifies it is not absolute circuit isolation.

Key Features and Specifications of Donner DP-1

  • Ten DC outputs: seven 9V/100mA, one 9V/500mA, one 12V/100mA, and one 18V/100mA.
  • AC input range of 100V–240V, with an 18V DC supply input specified.
  • Independent short-circuit protection; the other outputs can continue working if one output is shorted.
  • Noise-reduction circuit design and direct-current output, described as supporting lower-noise operation and supply stability.
  • Aluminum-alloy enclosure in a compact rectangular form, with a bright blue LED for pedalboard lighting and short-circuit indication.
  • Ten power cables are included.

Pros and Cons of Donner DP-1

Pros

  • Ten outputs allow several compatible pedals to share one supply.
  • The output mix includes 9V, 12V, and 18V connections.
  • A 500mA 9V output gives one higher-current pedal a dedicated option.
  • Independent short-circuit protection can help limit the effect of a fault at one output on the others.
  • The light aluminum-alloy enclosure and included cables support a portable board setup.

Consider before buying

  • Most outputs are rated at 100mA, so the available current may constrain boards with several higher-draw pedals.
  • The isolation effect is not described as absolute circuit isolation, a relevant distinction for players choosing a supply around strict isolation requirements.
  • The 12V and 18V outputs are each rated at 100mA, so compatibility depends on each pedal’s voltage and current needs.

Who Should Buy Donner DP-1?

Good fit

Consider the DP-1 if you want to power a group of effects from one supply and your pedal lineup mostly fits its seven 100mA 9V outputs.

The additional 500mA 9V connection can serve a compatible higher-current pedal, while the 12V and 18V outputs add options for effects designed for those voltages.

It may also suit a portable setup where a compact enclosure and several included cables are useful.

Plan the board before connecting it: check each pedal’s voltage and current requirements, assign the 500mA output where needed, and confirm the total arrangement fits your needs.

If you are considering it specifically for isolated power, weigh Donner’s qualification that the circuit design creates an isolation effect but does not mean absolute isolation. That detail matters when isolation is a firm requirement for your rig.

Who should skip it

Skip this supply if your board needs more than one 9V output rated above 100mA, or if several pedals exceed the current available from their assigned outputs. Compare each pedal’s requirements with the DP-1’s output ratings before committing.

Choose another approach if your setup depends on confirmed absolute circuit isolation. The DP-1’s stated design qualification does not support that expectation.

How the Donner DP-1 Fits a Multi-Pedal Board

Plan around the current ratings

The ten-output count is useful, but it does not mean every connection supplies the same current.

Seven outputs are rated at 100mA at 9V, while one 9V connection is rated at 500mA; the two higher-voltage outputs are also rated at 100mA.

Check each pedal’s required current and reserve the 500mA connection for a compatible effect that needs it.

Use the voltage options deliberately

The 12V and 18V outputs broaden the mix beyond standard 9V effects, but voltage compatibility is essential.

A pedal should be connected only to an output matching its specified voltage, and the 100mA ratings on those connections should also be checked against its current needs.

Understand the isolation qualification

Independent short-circuit protection addresses one practical concern: Donner says other outputs can keep working if a single output is shorted.

The product’s isolation design has a separate qualification: it aims to simulate independent supply isolation, but it is not absolute isolation in the circuit. Buyers who require absolute isolation should treat that as a central selection criterion.

Consider setup and portability

The light aluminum-alloy enclosure, compact rectangular form, blue LED, and ten included power cables make the unit oriented toward a pedalboard installation. The blue light is intended to illuminate the board and indicate a short circuit.

Check the intended mounting position and cable routing against your own board layout before setting up.

Alternatives to Donner DP-1

The supplied option that fits a pedalboard serves a different purpose, so it is included only as a setup accessory comparison rather than a competing power supply.

Guitar & Bass Accessories alternative

Donner Pedalboard Pedal Tape
4.7/5

1,000+ ratings

Read Amazon Reviews

Donner Pedalboard Pedal Tape

Choose the DP-1 when you need electrical power for compatible effects. Choose the tape when your priority is attaching pedals to a board; it does not perform the power-supply role.

  • This product is hook-and-loop mounting tape, 2m long and 50mm wide, with adhesive backing that can be cut to fit pedals and attached to a pedalboard.
  • The DP-1 is a power supply with ten outputs across 9V, 12V, and 18V, plus independent short-circuit protection.

Is Donner DP-1 Worth It?

The Donner DP-1 is worth considering for a multi-pedal board whose voltage and current needs fit its ten-output layout.

Its mix of 9V, 12V, and 18V connections, included cables, light enclosure, and independent short-circuit protection make a practical combination for compatible effects.

Check current requirements carefully: only one 9V output is rated at 500mA, while the other outputs are rated at 100mA. Also account for the stated limit on its isolation design.

If those tradeoffs suit your board, the DP-1 is a sensible option to compare against your power needs.

Your review at a glance

Donner DP-1 Guitar Power Supply
4.5/5

7,000+ ratings

Read Amazon Reviews

Donner DP-1 Guitar Power Supply

A practical choice for guitarists powering several 9V pedals plus select 12V or 18V effects from one compact supply.

  • Ten DC outputs: seven 9V/100mA, one 9V/500mA, one 12V/100mA, and one 18V/100mA.
  • AC input range of 100V–240V, with an 18V DC supply input specified.
  • Independent short-circuit protection; the other outputs can continue working if one output is shorted.
  • Noise-reduction circuit design and direct-current output, described as supporting lower-noise operation and supply stability.

Written by

typband.com Editorial Team

Editorial team

Independent editorial coverage of electronic music.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Donner DP-1 Guitar Power Supply

Donner DP-1 Guitar Power Supply

A practical choice for guitarists powering several 9V pedals plus select 12V or 18V effects from one compact supply.

  • Ten DC outputs: seven 9V/100mA, one 9V/500mA, one 12V/100mA, and one 18V/100mA.
  • AC input range of 100V–240V, with an 18V DC supply input specified.
Check Video Reviews on Amazon